 |
|
 |
 |
 Hot-dipped galvanized, aluminum and stainless steel fasteners are all corrosion-resistant and can be used to fasten Western Red Cedar. Other types of nails are not recommended. They can rust and disintegrate and react adversely with the natural preservative oils present in cedar resulting in unsightly stains and streaks. Copper nails also react with cedar and should not be used. Stainless steel fasteners are the best choice, especially if the wood is to be finished with transparent or semi-transparent stain. Use No. 304 stainless steel for general applications and No. 316 for seacoast exposure.
Park Shelter-Framed in Appearance Knotty structural timbers, this community park shelter creates an attractive invitation to park guests.
Playground Structure-Constructed of Appearance Knotty structural timbers, this playground uses cedar's natural resistance to decay to provide a chemical-free environment for children. |
|
|
Large members require timber connectors other than nails. Bolts, lag screws, split rings and shear plates, and custom made hardware are commonly used in heavy timber structures where the joint's strength must be greater than that which could be achieved with nails. These types of connectors should be corrosion-resistant or suitably coated to prevent corrosion and staining. Generally, the design of mechanically fastened joints must take into consideration a variety of factors such as end- and edge-spacing distances, moisture content, service conditions, and the effect of the number of connectors used. Because the cost of fabricating and installing connections may amount to a large percentage of the cost of a heavy timber structure, it is important to engineer the details of a structure before designing the timber members. |
|
|
|
| |
|
|
| |
|
|
| |
 |
Members of the Western Red Cedar Export Association provide western red cedar to Belgium, France, The Netherlands, United Kingdom, Australia, New Zealand, China, Japan and other markets around the world. |
|
|
| |
|
|
| |
|
|
|
|
|
